There is a complete variety of
glues that are specially created for building model boat kits. While applying the glue to the surfaces to be
joined don’t apply it using the nozzle of the bottle. Use a brush or a glue
syringe to coat the surfaces to be attached.
Ø Contact Glue
As the name implies, contact
glues provide a nearly immediate bond between the two surfaces. The glue is a
gel and is brushed on to both surfaces that are to be attached. Both surfaces
can be bonded together as soon as the glue is dried. At the time of lining up, the two surfaces great care is required to be taken since the bond is made
right away and is really strong. In the case of inaccuracy, removal will result
in damage to the timber. Prior to applying the glue, make sure you dry fit the
parts to be joined.
Contact glue is perfect for
joining the 2nd layer of planking over the 1st layer of
planking. The 2nd layer is typically a veneer decorative timber like
mahogany or walnut and is fixed in place very effectively using contact glue. Be
aware of the vapors given off by contact glue because it may result in
breathing issues. Always make sure that there is ample ventilation while
working with model boat kits and
making use of contact glue.
Ø Two part epoxy glue
It is composed of two parts – a
hardener and a resin – that are in different tubes and are combined together in
equal quantities. Based on the ambient temperature, this glue simply takes
roughly five minutes to dry out completely. It is perfect glue when it comes to
joining metal to metal or wood. Make use of a spatula or a matchstick to blend
the hardener and resin on a glass block or scrap piece of wood. The glue will
dry really hard and clear. Scrape off any surplus as the glue is still in its
plastic phase prior to it becomes firm.
Ø Cyanoacrylate or super glue
Super glue or Cyanoacrylate glue
is very quick drying. Based on the ambient temperature, it is just a matter of
seconds for this glue to set firmly. It is packed in a small tube of the plastic
bottle and extremely small amounts are required to be applied. Such sort of
glue can be utilized to the purpose of joining metal to metal or metal to wood.
When it comes to fixing the
planking to the hull, always keep away from making use of super glue. In
addition, this glue is not at all recommended to seal a rigging know for the
reason that it can make the cord brittle and hard. Once more, never consider
applying this glue straightforwardly to the job using the nozzle. Make use of
the point of a scalpel blade to apply the glue to the location required.
When it comes to applying glue to model boat kits, always keep in mind
that great care must be exercised. A little error can result in a substantial
injury.